Mazda 6 III Sedan (GJ) 2.2 SKYACTIV-D (175 Hp) i-ELOOP
Mazda 6:
The Mazda 6 is a mid-size sedan produced by Mazda since 2002, replacing the long-produced Capella/626.
The Mazda6 was marketed as the first example of the company's "Stylish, Insightful and Spirited" design philosophy, followed by the Mazda2 in December 2002, the RX-8 in August 2003, the Mazda3 in January 2004, the Mazda5 in the summer of 2005, the MX-5 in October 2005, and the CX-7 in November 2006. The 2003 Mazda6 is essentially the seventh-generation Mazda 626, part of the 'G' model code family....(Read more on Wikipedia)
III Sedan (GJ) Overview:
Mazda 6 (III Sedan (GJ)). With 420 Nm of torque, it offers ample pulling power. It boasts low fuel consumption (~5.5 l/100km). With a weight of 1405 kg, it falls in the mid‑range. Front‑wheel drive delivers efficiency and easy handling. Acceleration is good (0–100 km/h in 7.8 s). The top speed reaches 223 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.
Pros and Cons:
Pros:
- • Adequate and balanced power output (145 hp) for versatile driving.
- • Respectable acceleration of 9.6 sec, suitable for most driving situations.
- • Balanced fuel consumption of 5.6 L/100 km for its class.
- • Generous trunk capacity of 502 Liters.
- • Direct fuel injection technology for optimized combustion.
Cons:
- • Meets EURO 5 emission standard; check for local urban restriction zones.
- • Previous generation model; may lack the latest driver-assist technologies.
Specifications:
Specifications are compared to those of the previous generation(II Combi (GH, facelift 2010): 2010 - 2012).
| General: |
| Brand: | Mazda |
| Model: | 6 |
| Generation: | III Sedan (GJ) |
| Modification (Engine): | 2.2 SKYACTIV-D (175 Hp) i-ELOOP |
| Start of production: | 2012 |
| End of production: | 2015 |
| Powertrain Architecture: | Internal Combustion engine |
| Body type: | Sedan |
| Seats: | 5 |
| Doors: | 4 |
| Engine: |
| Engine systems: | Particulate filter |
| Power: | 175 Hp @ 4500 rpm. Same horsepower |
| Power per litre: | 80.1 Hp/l [80mm more] |
| Torque: | 420 Nm @ 2000 rpm. |
| Engine displacement: | 2184 |
| Number of cylinders: | 4 |
| Engine configuration: | Inline |
| Number of valves per cylinder: | 4 |
| Fuel injection system: | Diesel Commonrail |
| Engine aspiration: | BiTurbo, Intercooler |
| Engine oil capacity: | 5.1 l |
| Coolant: | 8.5 l |
| Engine layout: | Front, Transverse |
| Performance: |
| Fuel Type: | Diesel |
| Fuel consumption (economy) - urban: | 5.5 l/100 km |
| Fuel consumption (economy) - extra urban: | 3.9 l/100 km |
| Fuel consumption (economy) - combined: | 4.5 l/100 km |
| Emission standard: | Euro 6 |
| Acceleration 0 - 100 km/h: | 7.8 sec |
| Acceleration 0 - 62 mph: | 7.8 sec |
| Maximum speed: | 223 km/h |
| Weight-to-power ratio: | 8 kg/Hp, 124.6 Hp/tonne |
| Weight-to-torque ratio: | 3.3 kg/Nm, 298.9 Nm/tonne |
| Acceleration 0 - 60 mph: | 7.4 sec |
| Space: |
| Kerb Weight: | 1405 |
| Trunk (boot) space - minimum: | 489 l |
| Fuel tank capacity: | 62 l |
| Size: |
| Length: | 4865 mm mm [80mm more] |
| Width: | 1840 mm mm [45mm more] |
| Height: | 1450 mm mm [40mm less] |
| Wheelbase: | 2830 mm mm [105mm more] |
| Powertrain: |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the front wheels of the vehicle. |
|---|
| Drive wheel | Front wheel drive |
|---|
| Number of gears | 6 |
|---|
| Transmission type | Manual |
|---|
| Assisting systems | ABS (Anti-lock braking system) |
|---|
| Steering type | Steering rack and pinion |
Show off your Mazda 6 knowledge – drop a review below!