Lancia Prisma 831 AB 1.6 (105 Hp)


Overall Rating

6.4 / 10
Safety N/A / 5
Not Rated
Engine 3.5 / 5
Value 3.5 / 5
Performance 3.0 / 5
Comfort 3.8 / 5
People\'s Opinion N/A / 5
Not Rated

Lancia Prisma:

The Lancia Prisma is a small family car built by Italian car manufacturer Lancia between 1982 and 1989. It was a saloon version of the first generation Lancia Delta hatchback, and like the Delta it was designed by Giorgetto Giugiaro. Like the Delta it was also available as a 4x4 integrale version, although with a non-turbocharged engine and an air-locking rear differential.
The Lancia Prisma was a four-door, five-seat saloon with steel unibody construction, front-transverse mounted engines in block with the transaxle and all-independent suspension. Suspension consisted of MacPherson struts with offset telescopic dampers and coil springs, and anti-roll bars on both axles. The front struts were located by a stamped steel control arm and one radius rod; the rear by two parallel transverse links attached to a crossmember and one trailing link....(Read more on Wikipedia)

831 AB Overview:

Lancia Prisma (831 AB). With 135 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~10.2 l/100km). Weighing only 975 kg, it’s quite light. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 10.2 s). The top speed reaches 178 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.

1.6 (105 Hp) Verdict:

Rating 4 stars

Performance Verdict

A strong performer for its class, offering good acceleration (10.2 sec) and highway cruising ability, making it enjoyable on longer journeys.

Fuel Economy

Decent fuel economy for a 105hp engine of its era, especially on longer runs where it can maintain efficiency.

Best Use Case: Highway

Pros and Cons:

Pros:

  • • Comfortable ride quality for its class
  • • Spacious interior for a compact executive sedan
  • • Distinctive Italian styling and design
  • • Available 4WD option for enhanced traction
  • • Good handling characteristics for its time

Cons:

  • • Prone to rust and electrical issues common in Italian cars of the era
  • • Some engines lack modern refinement and power compared to later models
  • • Limited safety features by today's standards
  • • Finding replacement parts can be challenging now due to age
  • • Resale value often low, though this can make it an affordable classic

Specifications:

Specifications are compared to those of the previous generation(831 AB: 1987 - 1989).

General:
Brand:Lancia
Model:Prisma
Generation:831 AB
Modification (Engine):1.6 (105 Hp)
Start of production:April, 1983
End of production:May, 1986
Powertrain Architecture:Internal Combustion engine
Body type:Sedan
Seats:5
Doors:4
Engine:
Power:105 Hp @ 5800 rpm. Same horsepower
Power per litre:66.2 Hp/l [worst than previous generation]
Torque:135 Nm @ 3300 rpm.
Engine Model/Code:831 A4.000 More details about the engine 831 A4.000
Engine displacement:1585
Number of cylinders:4
Engine configuration:Inline
Number of valves per cylinder:2
Fuel injection system:Carburettor
Engine aspiration:Naturally aspirated engine
Valvetrain:DOHC
Engine oil capacity:5 l
Coolant:6 l
Engine layout:Front, Transverse
Cylinder Bore:84 mm mm
Piston Stroke:71.5 mm mm
Compression ratio:9.3:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:10.2 l/100 km
Fuel consumption (economy) - extra urban:6.4 l/100 km
Acceleration 0 - 100 km/h:10.2 sec
Acceleration 0 - 62 mph:10.2 sec
Maximum speed:178 km/h
Weight-to-power ratio:9.3 kg/Hp, 107.7 Hp/tonne
Weight-to-torque ratio:7.2 kg/Nm, 138.5 Nm/tonne
Acceleration 0 - 60 mph:9.7 sec
Space:
Kerb Weight:975
Max. weight:1425
Max. roof load:50 kg
Max load:450
Trunk (boot) space - minimum:450 l
Permitted trailer load with brakes (12%):1000 kg
Fuel tank capacity:45 l
Size:
Length:4180 mm mm
Width:1620 mm mm
Height:1385 mm mm
Wheelbase:2475 mm mm
Front track:1400 mm
Rear (Back) track:1400 mm
Minimum turning circle (turning diameter):10.6 m [above average]
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheelFront wheel drive
Number of gears5
Transmission typeManual
Front brakesDisc [above average]
Rear brakesDisc [above average]
Steering typeSteering rack and pinion
Tires size165/65 R14
Wheel rims size5.5J x 14
Front suspensionIndependent, type McPherson with coil spring and anti-roll bar
Rear suspensionMcPherson, Transverse stabilizer

Fuel, speed, and comfort: How does the Lancia Prisma rank in your book?