Click on image to view the full photo gallery
Lancia Prisma 831 AB 1.5 (85 Hp)
Overall Rating
Lancia Prisma:
The Lancia Prisma is a small family car built by Italian car manufacturer Lancia between 1982 and 1989. It was a saloon version of the first generation Lancia Delta hatchback, and like the Delta it was designed by Giorgetto Giugiaro. Like the Delta it was also available as a 4x4 integrale version, although with a non-turbocharged engine and an air-locking rear differential.
The Lancia Prisma was a four-door, five-seat saloon with steel unibody construction, front-transverse mounted engines in block with the transaxle and all-independent suspension. Suspension consisted of MacPherson struts with offset telescopic dampers and coil springs, and anti-roll bars on both axles. The front struts were located by a stamped steel control arm and one radius rod; the rear by two parallel transverse links attached to a crossmember and one trailing link....(Read more on Wikipedia)
831 AB Overview:
Lancia Prisma (831 AB). With 126 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~9.3 l/100km). Weighing only 940 kg, it’s quite light. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 12 s). The top speed reaches 165 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.
1.5 (85 Hp) Verdict:
Performance Verdict
Adequate for city driving, but can feel strained on highways or with a full load. Acceleration is modest at 12 seconds to 100 km/h.
Fuel Economy
One of the more economical petrol options, good for urban use and lighter loads.
Pros and Cons:
Pros:
- • Comfortable ride quality for its class
- • Spacious interior for a compact executive sedan
- • Distinctive Italian styling and design
- • Available 4WD option for enhanced traction
- • Good handling characteristics for its time
Cons:
- • Prone to rust and electrical issues common in Italian cars of the era
- • Some engines lack modern refinement and power compared to later models
- • Limited safety features by today's standards
- • Finding replacement parts can be challenging now due to age
- • Resale value often low, though this can make it an affordable classic
Specifications:
Specifications are compared to those of the previous generation(831 AB: 1987 - 1989).
| General: | |
|---|---|
| Brand: | Lancia |
| Model: | Prisma |
| Generation: | 831 AB |
| Modification (Engine): | 1.5 (85 Hp) |
| Start of production: | April, 1983 |
| End of production: | May, 1986 |
| Powertrain Architecture: | Internal Combustion engine |
| Body type: | Sedan |
| Seats: | 5 |
| Doors: | 4 |
| Engine: | |
|---|---|
| Power: | 85 Hp @ 5800 rpm. Same horsepower |
| Power per litre: | 56.7 Hp/l [worst than previous generation] |
| Torque: | 126 Nm @ 3500 rpm. |
| Engine Model/Code: | 831 A1.000 More details about the engine 831 A1.000 |
| Engine displacement: | 1498 |
| Number of cylinders: | 4 |
| Engine configuration: | Inline |
| Number of valves per cylinder: | 2 |
| Fuel injection system: | Carburettor |
| Engine aspiration: | Naturally aspirated engine |
| Valvetrain: | SOHC |
| Engine oil capacity: | 4.3 l |
| Coolant: | 6 l |
| Engine layout: | Front, Transverse |
| Cylinder Bore: | 86.4 mm mm |
| Piston Stroke: | 63.9 mm mm |
| Compression ratio: | 9.2:1 |
| Performance: | |
|---|---|
| Fuel Type: | Petrol (Gasoline) |
| Fuel consumption (economy) - urban: | 9.3 l/100 km |
| Fuel consumption (economy) - extra urban: | 5.9 l/100 km |
| Acceleration 0 - 100 km/h: | 12 sec |
| Acceleration 0 - 62 mph: | 12 sec |
| Maximum speed: | 165 km/h |
| Weight-to-power ratio: | 11.1 kg/Hp, 90.4 Hp/tonne |
| Weight-to-torque ratio: | 7.5 kg/Nm, 134 Nm/tonne |
| Acceleration 0 - 60 mph: | 11.4 sec |
| Space: | |
|---|---|
| Kerb Weight: | 940 |
| Max. weight: | 1390 |
| Max. roof load: | 50 kg |
| Max load: | 450 |
| Trunk (boot) space - minimum: | 450 l |
| Permitted trailer load with brakes (12%): | 1000 kg |
| Fuel tank capacity: | 45 l |
| Size: | |
|---|---|
| Length: | 4180 mm mm |
| Width: | 1620 mm mm |
| Height: | 1385 mm mm |
| Wheelbase: | 2475 mm mm |
| Front track: | 1400 mm |
| Rear (Back) track: | 1400 mm |
| Minimum turning circle (turning diameter): | 10.6 m [above average] |
| Powertrain: | |
|---|---|
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the front wheels of the vehicle. |
| Drive wheel | Front wheel drive |
| Number of gears | 5 |
| Transmission type | Manual |
| Front brakes | Disc [bad for performance and cooling.] |
| Rear brakes | Drum [bad for performance and cooling.] |
| Steering type | Steering rack and pinion |
| Tires size | 165/70 R13 |
| Wheel rims size | 5J x 13 |
| Front suspension | Independent, type McPherson with coil spring and anti-roll bar |
| Rear suspension | McPherson, Transverse stabilizer |
Was the Lancia Prisma what you expected? Let us know!