Result:
Audi
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Secondary air injection (AIR) system - short to ground
Cause:
Wiring short to ground, AIR relay
Ford
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
EVAP System Canister Vent Solenoid Circuit Conditions
Cause:
Engine running at a stable cruise speed with the canister vent solenoid enabled, then the PCM detected that the solenoid voltage was out of its limit.
GM
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Barometric Pressure Sensor Performance Conditions
Cause:
Key on for 2 seconds or engine cranked for 2 seconds, then the PCM detected the difference between BARO pressure and manifold absolute pressure was 67 kPa or more during the test.
Land Rover
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Leak detection pump
Cause:
Wiring, pump, ECM
Mazda
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Evaporative emission (EVAP) canister vent valve - circuit malfunction
Cause:
Wiring, EVAP vent valve, fuel tank pressure sensor, ECM
Saab
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Evaporative emission (EVAP) pressure sensor, in fuel tank - range/performance problem
Cause:
Wiring, connectors, EVAP pressure sensor
Suzuki
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Barometric pressure (BARO) sensor - range/ performance problem
Cause:
ECM
Volkswagen
Type:
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
Secondary air injection (AIR) system - short to ground
Cause:
Wiring short to ground, AIR relay