Mazda Sentia HC 3.0 i V6 24V (205 Hp)
Mazda Sentia:
The Mazda Sentia is a mid-size rear wheel drive luxury car that was sold by Mazda in Japan from 1991 to 1999 over two generations. It replaced the Mazda Luce nameplate on the Mazda H platform, and continued the tradition of being Mazda's largest flagship sedan, which had been in production since the late 1960s.
The Sentia was also built under license in South Korea until October 2002 by Kia, at the Hwaseong Plant where it was sold as the Kia Enterprise....(Read more on Wikipedia)
HC Overview:
Mazda Sentia (HC). With 272 Nm of torque, it offers ample pulling power. With a weight of 1600 kg, it falls in the mid‑range. Rear‑wheel drive offers dynamic handling and sporty feedback. The top speed reaches 220 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.
Pros and Cons:
Pros:
- • Adequate and balanced power output (205 hp) for versatile driving.
- • Rear-wheel drive layout for enhanced handling and balance.
- • Ventilated disc brakes for reliable cooling and stopping power.
Cons:
- • Previous generation model; may lack the latest driver-assist technologies.
Specifications:
Specifications are compared to those of the previous generation(HC: 1991 - 1996).
| General: |
| Brand: | Mazda |
| Model: | Sentia |
| Generation: | HC |
| Modification (Engine): | 3.0 i V6 24V (205 Hp) |
| Start of production: | 1996 |
| End of production: | 2000 |
| Powertrain Architecture: | Internal Combustion engine |
| Body type: | Sedan |
| Seats: | 5 |
| Doors: | 4 |
| Engine: |
| Power: | 205 Hp @ 6000 rpm. |
| Power per litre: | 69.4 Hp/l |
| Torque: | 272 Nm @ 3500 rpm. |
| Engine displacement: | 2954 |
| Number of cylinders: | 6 |
| Engine configuration: | V-engine |
| Number of valves per cylinder: | 4 |
| Fuel injection system: | Multi-port manifold injection |
| Engine aspiration: | Naturally aspirated engine |
| Valvetrain: | DOHC |
| Engine layout: | Front, Longitudinal |
| Cylinder Bore: | 90 mm mm |
| Piston Stroke: | 77.4 mm mm |
| Compression ratio: | 9.5:1 |
| Performance: |
| Fuel Type: | Petrol (Gasoline) |
| Fuel consumption (economy) - urban: | 18 l/100 km |
| Fuel consumption (economy) - extra urban: | 10 l/100 km |
| Maximum speed: | 220 km/h |
| Weight-to-power ratio: | 7.8 kg/Hp, 128.1 Hp/tonne |
| Weight-to-torque ratio: | 5.9 kg/Nm, 170 Nm/tonne |
| Space: |
| Kerb Weight: | 1600 |
| Fuel tank capacity: | 70 l |
| Size: |
| Length: | 4895 mm mm [25mm less] |
| Width: | 1795 mm mm [Same width.] |
| Height: | 1420 mm mm [25mm more] |
| Wheelbase: | 2850 mm mm [Same wheelbase.] |
| Front track: | 1510 mm |
| Rear (Back) track: | 1520 mm |
| Powertrain: |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the rear wheels of the vehicle. |
|---|
| Drive wheel | Rear wheel drive |
|---|
| Number of gears | 4 |
|---|
| Transmission type | Automatic |
|---|
| Front brakes | Ventilated discs [Best for performance and cooling.] |
|---|
| Rear brakes | Disc |
|---|
| Assisting systems | ABS (Anti-lock braking system) |
|---|
| Power steering | Hydraulic Steering |
|---|
| Tires size | 205/65 R15 93 H |
|---|
| Wheel rims size | 6J x 15 ET 50 |
|---|
| Front suspension | Coil spring |
|---|
| Rear suspension | Double wishbone |
Show off your Mazda Sentia knowledge – drop a review below!