Mazda 2 II (DE) 1.5i (103 Hp)


Mazda 2:

The Mazda 2 is a subcompact/supermini car, which has been available as a 4-door sedan and a 5 door hatchback manufactured and marketed by Mazda since 2002, currently in its third generation. An entry-level model of the brand in markets outside Japan, the Mazda2 is positioned below the Mazda3. The Mazda2 has also been marketed as the Mazda Demio , while its direct predecessor was exported as the Mazda 121....(Read more on Wikipedia)

II (DE) Overview:

Mazda 2 (II (DE)). With 137 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~7.6 l/100km). Weighing only 960 kg, it’s quite light. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 10.4 s). The top speed reaches 188 km/h. A compact car with a rear door that swings upward to provide access to the cargo area. Seating for 5 makes it ideal for daily use.

Pros and Cons:

Pros:

  • • Efficiency-focused engine (75 hp), ideal for city commuting.
  • • Steady and predictable acceleration (0-100 km/h in 14 sec).
  • • Exceptional fuel efficiency: 5.4 L/100 km.
  • • Ventilated disc brakes for reliable cooling and stopping power.

Cons:

  • • Compact cargo space (250 L); may require careful packing.
  • • Meets EURO 4 emission standard; check for local urban restriction zones.
  • • Previous generation model; may lack the latest driver-assist technologies.


Specifications:

Specifications are compared to those of the previous generation(I (DY): 2003 - 2007).

General:
Brand:Mazda
Model:2
Generation:II (DE)
Modification (Engine):1.5i (103 Hp)
Start of production:2007
End of production:2010
Powertrain Architecture:Internal Combustion engine
Body type:Hatchback
Seats:5
Doors:5
Engine:
Power:103 Hp @ 6000 rpm. Same horsepower
Power per litre:68.8 Hp/l [25mm less]
Torque:137 Nm @ 4000 rpm.
Engine Model/Code:ZY66, ZY84 More details about the engine ZY66, ZY84
Engine displacement:1498
Number of cylinders:4
Engine configuration:Inline
Number of valves per cylinder:4
Fuel injection system:Multi-port manifold injection
Engine aspiration:Naturally aspirated engine
Valvetrain:DOHC
Engine oil capacity:3.9 l
Coolant:5.2 l
Engine layout:Front, Transverse
Cylinder Bore:78 mm mm
Piston Stroke:78.4 mm mm
Compression ratio:10:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:7.6 l/100 km
Fuel consumption (economy) - extra urban:4.9 l/100 km
Fuel consumption (economy) - combined:5.9 l/100 km
Emission standard:Euro 4
Acceleration 0 - 100 km/h:10.4 sec
Acceleration 0 - 62 mph:10.4 sec
Maximum speed:188 km/h
Weight-to-power ratio:9.3 kg/Hp, 107.3 Hp/tonne
Weight-to-torque ratio:7 kg/Nm, 142.7 Nm/tonne
Acceleration 0 - 60 mph:9.9 sec
Space:
Kerb Weight:960
Max. weight:1485
Max load:525
Trunk (boot) space - maximum:787 l
Trunk (boot) space - minimum:250 l
Permitted trailer load with brakes (12%):900 kg
Fuel tank capacity:43 l
Permitted trailer load without brakes:500 kg
Size:
Length:3900 mm mm [25mm less]
Width:1695 mm mm [15mm more]
Height:1475 mm mm [70mm less]
Wheelbase:2490 mm mm [Same wheelbase.]
Front track:1465 mm
Rear (Back) track:1455 mm
Ride height (ground clearance):150 mm
Minimum turning circle (turning diameter):9.8 m [above average]
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheelFront wheel drive
Number of gears5
Transmission typeManual
Front brakesVentilated discs [Best for performance and cooling.]
Rear brakesDrum [bad for performance and cooling.]
Assisting systemsABS (Anti-lock braking system)
Steering typeSteering rack and pinion
Tires size195/45 R16
Wheel rims size16
Front suspensionSpring Strut
Rear suspensionCoil spring

Describe your experience with the Mazda 2 using only emojis!