Mazda 2 II (DE, facelift 2010) 1.3i (84 Hp)


Mazda 2:

The Mazda 2 is a subcompact/supermini car, which has been available as a 4-door sedan and a 5 door hatchback manufactured and marketed by Mazda since 2002, currently in its third generation. An entry-level model of the brand in markets outside Japan, the Mazda2 is positioned below the Mazda3. The Mazda2 has also been marketed as the Mazda Demio , while its direct predecessor was exported as the Mazda 121....(Read more on Wikipedia)

II (DE, facelift 2010) Overview:

Mazda 2 (II (DE, facelift 2010)). With 121 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~6.4 l/100km). Weighing only 960 kg, it’s quite light. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 13.6 s). The top speed reaches 172 km/h. A compact car with a rear door that swings upward to provide access to the cargo area. Seating for 5 makes it ideal for daily use.

Pros and Cons:

Pros:

  • • Efficiency-focused engine (84 hp), ideal for city commuting.
  • • Steady and predictable acceleration (0-100 km/h in 13.6 sec).
  • • Exceptional fuel efficiency: 5.1 L/100 km.
  • • Ventilated disc brakes for reliable cooling and stopping power.

Cons:

  • • Compact cargo space (250 L); may require careful packing.
  • • Meets EURO 5 emission standard; check for local urban restriction zones.
  • • Previous generation model; may lack the latest driver-assist technologies.


Specifications:

Specifications are compared to those of the previous generation(II (DE): 2009 - 2010).

General:
Brand:Mazda
Model:2
Generation:II (DE, facelift 2010)
Modification (Engine):1.3i (84 Hp)
Start of production:2010
End of production:2014
Powertrain Architecture:Internal Combustion engine
Body type:Hatchback
Seats:5
Doors:5
Engine:
Power:84 Hp @ 6000 rpm. Same horsepower
Power per litre:62.3 Hp/l [20mm more]
Torque:121 Nm @ 3500 rpm.
Engine displacement:1349
Number of cylinders:4
Engine configuration:Inline
Number of valves per cylinder:4
Fuel injection system:Multi-port manifold injection
Engine aspiration:Naturally aspirated engine
Valvetrain:DOHC
Engine oil capacity:3.9 l
Coolant:5.3 l
Engine layout:Front, Transverse
Cylinder Bore:74 mm
Piston Stroke:78.4 mm
Compression ratio:10:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:6.4 l/100 km
Fuel consumption (economy) - extra urban:4.3 l/100 km
Fuel consumption (economy) - combined:5.1 l/100 km
Emission standard:Euro 5
Acceleration 0 - 100 km/h:13.6 sec
Acceleration 0 - 62 mph:13.6 sec
Maximum speed:172 km/h
Weight-to-power ratio:11.4 kg/Hp, 87.5 Hp/tonne
Weight-to-torque ratio:7.9 kg/Nm, 126 Nm/tonne
Acceleration 0 - 60 mph:12.9 sec
Space:
Kerb Weight:960
Max. weight:1485
Max load:525
Trunk (boot) space - maximum:787 l
Trunk (boot) space - minimum:250 l
Permitted trailer load with brakes (12%):900 kg
Fuel tank capacity:43 l
Permitted trailer load without brakes:500 kg
Size:
Length:3920 mm [20mm more]
Width:1695 mm [Same width.]
Height:1475 mm [Same height.]
Wheelbase:2490 mm [Same wheelbase.]
Width including mirrors:1958 mm
Front track:1475 mm
Rear (Back) track:1465 mm
Ride height (ground clearance):150 mm
Minimum turning circle (turning diameter):9.8 m [above average]
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheelFront wheel drive
Number of gears5
Transmission typeManual
Front brakesVentilated discs [Best for performance and cooling.]
Rear brakesDrum [bad for performance and cooling.]
Assisting systemsABS (Anti-lock braking system)
Steering typeSteering rack and pinion
Power steeringElectric Steering
Tires size185/55 R15
Wheel rims size15

Fuel, speed, and comfort: How does the Mazda 2 rank in your book?