Holden Statesman VH 3.8 i V6 (200 Hp)


Holden Statesman:

The Holden Caprice is a full-size luxury car which was produced by Holden in Australia from 1990 to October 2017. The similar Holden Statesman, which was also introduced in 1990 as a model below the Caprice, was discontinued in September 2010. Between 1971 and 1985, Holden marketed their long-wheelbase sedans under the Statesman marque.
Statesman and Caprice are essentially long-wheelbase variants of the Commodore range, and as of 2006, were the largest rear-wheel drive sedans offered by GM. Internationally, Statesmans and Caprices have been rebadged as the Buick Royaum, Daewoo Statesman, and Chevrolet Caprice. In addition, these cars have formed the basis of the Chinese-built Buick Park Avenue and the Bitter Vero, a rebodied version from Germany....(Read more on Wikipedia)

VH Overview:

Holden Statesman (VH). With 304 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~10.5 l/100km). With a weight of 1520 kg, it falls in the mid‑range. Rear‑wheel drive offers dynamic handling and sporty feedback. Acceleration is good (0–100 km/h in 8.7 s). The top speed reaches 200 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.

reddit Community Verdict

This rating is based on comments found on Reddit, scanned using artificial intelligence, and may not accurately reflect reality.

Allowed: 0% Neutral: 57% Issues: 43%
rating
2.1 / 5

Based on AI analysis of 7 discussions

Read What Owners Say
👎 NEGATIVE
Very few statesmans came with spoilers if any at all they have a different boot to a sedan so you wont find one easily that fits either. Also would look terrible IMO
😐 NEUTRAL
You may be able to find a boot lip style spoiler. An aftermarket parts company called Sydney Special Vehicles based in Cromer, sydney Northern Beaches used to carry all sorts of Holden gear. There is still an active website, give it a go. Good luck!
😐 NEUTRAL
So the short answer is yes you can, but honestly they dont look good on VR/VS stato's. Holden actually offered a rear wing for that model statesman from factory and a few people took them up on it (you should google image that to see what it looks like on) and they aren't great looking. Ive got a VS stato and a WH LS8 international stato and the WH came factory with a boot lip spoiler which looks
😐 NEUTRAL
Can you? Of course! Should you?? You do you boo!! Will people like it?? Probably not, but building a car for other people defeats the purpose of this hobby!! (Unless it’s a show car, but anything goes when your going down that path) Suggestion?? Lip style spoiler. The big a bulky nature of the Stato lends itself to a long flat spoiler that follows the flat line of the boot (like a sedan drag
👎 NEGATIVE
Please God no. Why do P platers always come up with cooked ideas?
👎 NEGATIVE
You can, not sure why you would though.
😐 NEUTRAL
They’ll be hard to find, given that not many original owners ticked the box at ordering time. But go for it. Won’t give you much in the way of downforce, just bear that in mind.


Pros and Cons:

Pros:

  • • Adequate and balanced power output (200 hp) for versatile driving.
  • • Respectable acceleration of 8.7 sec, suitable for most driving situations.
  • • Rear-wheel drive layout for enhanced handling and balance.
  • • Ventilated disc brakes for reliable cooling and stopping power.
  • • Standard trunk space (445 L) suitable for daily needs.

Cons:

  • • Previous generation model; may lack the latest driver-assist technologies.


Specifications:

Specifications are compared to those of the previous generation(VS: 1990 - 1998).

General:
Brand:Holden
Model:Statesman
Generation:VH
Modification (Engine):3.8 i V6 (200 Hp)
Start of production:1998
End of production:2003
Powertrain Architecture:Internal Combustion engine
Body type:Sedan
Seats:5
Doors:4
Engine:
Power:200 Hp @ 5200 rpm.
Power per litre:52.8 Hp/l
Torque:304 Nm @ 3600 rpm.
Engine displacement:3791
Number of cylinders:6
Engine configuration:V-engine
Number of valves per cylinder:2
Fuel injection system:Multi-port manifold injection
Engine aspiration:Naturally aspirated engine
Engine layout:Front, Longitudinal
Cylinder Bore:96.5 mm mm
Piston Stroke:86.4 mm mm
Compression ratio:9.4:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:10.5 l/100 km
Fuel consumption (economy) - extra urban:8 l/100 km
Acceleration 0 - 100 km/h:8.7 sec
Acceleration 0 - 62 mph:8.7 sec
Maximum speed:200 km/h
Weight-to-power ratio:7.6 kg/Hp, 131.6 Hp/tonne
Weight-to-torque ratio:5 kg/Nm, 200 Nm/tonne
Acceleration 0 - 60 mph:8.3 sec
Space:
Kerb Weight:1520
Trunk (boot) space - minimum:445 l
Fuel tank capacity:73 l
Size:
Length:4990 mm mm [1mm more]
Width:1795 mm mm [1mm more]
Height:1420 mm mm [43mm less]
Wheelbase:2825 mm mm [1mm less]
Front track:1490 mm
Rear (Back) track:1490 mm
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive wheelRear wheel drive
Number of gears4
Transmission typeAutomatic
Front brakesVentilated discs [Best for performance and cooling.]
Rear brakesDisc
Assisting systemsABS (Anti-lock braking system)
Steering typeSteering rack and pinion
Power steeringHydraulic Steering
Tires size205/65 R15
Front suspensionSpring Strut
Rear suspensionCoil spring

Your first impression of the Holden Statesman in one word? Go!