Alfa Romeo 75 162 B 2.0 (128 Hp)
Alfa Romeo 75:
The Alfa Romeo 75 , sold in North America as the Milano, is a compact executive car produced by the Italian automaker Alfa Romeo between 1985 and 1992. The 75 was commercially quite successful: in only three years, 236,907 cars were produced, and by the end of production in 1992, around 386,767 had been built.
The 75 was the last model released before Alfa Romeo was acquired by Fiat.
The 75 was introduced in May 1985 to replace the Giulietta , and was named to celebrate Alfa Romeo's 75th anniversary. The body, designed by head of Centro Stile Alfa Romeo Ermanno Cressoni, was styled in a striking wedge shape, tapering at the front with square headlights and a matching grille....(Read more on Wikipedia)
162 B Overview:
Alfa Romeo 75 (162 B). With 186 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~9.9 l/100km). Weighing only 1070 kg, it’s quite light. Rear‑wheel drive offers dynamic handling and sporty feedback. Acceleration is good (0–100 km/h in 8.9 s). The top speed reaches 195 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.
Pros and Cons:
Pros:
- • Adequate and balanced power output (156 hp) for versatile driving.
- • Respectable acceleration of 10.3 sec, suitable for most driving situations.
- • Rear-wheel drive layout for enhanced handling and balance.
- • Ventilated disc brakes for reliable cooling and stopping power.
- • Generous trunk capacity of 500 Liters.
Cons:
- • Relatively high fuel consumption: 10.2 L/100 km combined.
- • Previous generation model; may lack the latest driver-assist technologies.
Specifications:
| General: |
| Brand: | Alfa Romeo |
| Model: | 75 |
| Generation: | 162 B |
| Modification (Engine): | 2.0 (128 Hp) |
| Start of production: | 1985 |
| End of production: | 1988 |
| Powertrain Architecture: | Internal Combustion engine |
| Body type: | Sedan |
| Seats: | 5 |
| Doors: | 4 |
| Engine: |
| Power: | 128 Hp @ 5400 rpm. |
| Power per litre: | 65.2 Hp/l |
| Torque: | 186 Nm @ 4000 rpm. |
| Engine Model/Code: | 062.12 |
| Engine displacement: | 1962 |
| Number of cylinders: | 4 |
| Engine configuration: | Inline |
| Number of valves per cylinder: | 2 |
| Fuel injection system: | Carburettor |
| Engine aspiration: | Naturally aspirated engine |
| Valvetrain: | OHC |
| Engine oil capacity: | 5.6 l |
| Coolant: | 8 l |
| Engine layout: | Front, Longitudinal |
| Cylinder Bore: | 84 mm mm |
| Piston Stroke: | 88.5 mm mm |
| Compression ratio: | 9:1 |
| Performance: |
| Fuel Type: | Petrol (Gasoline) |
| Fuel consumption (economy) - urban: | 9.9 l/100 km |
| Fuel consumption (economy) - extra urban: | 8.4 l/100 km |
| Acceleration 0 - 100 km/h: | 8.9 sec |
| Acceleration 0 - 62 mph: | 8.9 sec |
| Maximum speed: | 195 km/h |
| Weight-to-power ratio: | 8.4 kg/Hp, 119.6 Hp/tonne |
| Weight-to-torque ratio: | 5.8 kg/Nm, 173.8 Nm/tonne |
| Acceleration 0 - 60 mph: | 8.5 sec |
| Space: |
| Kerb Weight: | 1070 |
| Max. weight: | 1495 |
| Max load: | 425 |
| Trunk (boot) space - minimum: | 500 l |
| Fuel tank capacity: | 49 l |
| Size: |
| Length: | 4330 mm mm |
| Width: | 1630 mm mm |
| Height: | 1400 mm mm |
| Wheelbase: | 2510 mm mm |
| Front track: | 1368 mm |
| Rear (Back) track: | 1358 mm |
| Front overhang: | 825 mm |
| Rear overhang: | 995 mm |
| Ride height (ground clearance): | 120 mm |
| Minimum turning circle (turning diameter): | 10.9 m |
| Powertrain: |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the rear wheels of the vehicle. |
|---|
| Drive wheel | Rear wheel drive |
|---|
| Number of gears | 5 |
|---|
| Transmission type | Manual |
|---|
| Steering type | Steering rack and pinion |
|---|
| Tires size | 185/65 R14 |
|---|
| Wheel rims size | 14 |
Show off your Alfa Romeo 75 knowledge – drop a review below!