Result:

p1106

Acura
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Barometric pressure (BARO) sensor - range/performance
Cause:
    ECM

Audi
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Heated oxygen sensor (HO2S) 1, Bank 2 - low voltage/air leak
Cause:
    Intake/exhaust leak, fuel pressure/pump, wiring short to ground, HO2S

GM
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    MAP Sensor Circuit Intermittent High Input Conditions
Cause:
    No TP sensor codes set, engine running for a length of time that is determined by startup coolant temperature (the length of time ranges from 3 minutes at less than -22°F to less than a second at more than 86°F), throttle angle less than 89% with engine speed less than 1000 rpm or throttle angle less than 97% with engine speed more than 1000 rpm, then the PCM detected that the MAP input indicated over 4.9v condition present for less than 1 second

Honda
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Barometric pressure (BARO) sensor - range/performance problem
Cause:
    ECM

Isuzu
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Barometric pressure (BARO) sensor - range/performance problem
Cause:
    ECM

Jaguar
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Manifold absolute pressure (MAP) sensor - range/performance
Cause:
    Wiring, MAP sensor

Saab
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Manifold absolute pressure (MAP) sensor, TC system - range/performance problem
Cause:
    MAP sensor - TC system

Subaru
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Engine torque control signal 2 - circuit malfunction
Cause:
    Wiring, ECM, TCM

Volkswagen
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Heated oxygen sensor (HO2S) low voltage/air leak
Cause:
    Intake/exhaust leak, fuel pressure/pump, wiring short to ground, HO2S

Look for code