Fiat 126 700 (26 Hp)


Fiat 126:

The Fiat 126 is a city car manufactured and marketed by Fiat from 1972 until 2000 over a single generation. It has a rear-engine design and seats four passengers. Introduced by Fiat in October 1972 at the Turin Auto Show, the 126 replaced the Fiat 500, using major elements from its design. A subsequent iteration, marketed as the 126 Bis, used a horizontally oriented, water-cooled engine, and featured a rear hatchback with additional cargo space.
The majority of 126s were manufactured in Tychy and Bielsko-Biała plants, Poland and were marketed as the Polski Fiat 126p in many markets. Fiat stopped marketing the 126 in 1993 in favor of its new front-engined Cinquecento. Total production reached approximately 4. 7 million units....(Read more on Wikipedia)

126 Overview:

Fiat 126 (126). With 49 Nm of torque, it offers ample pulling power. It boasts low fuel consumption (~5.8 l/100km). Weighing only 645 kg, it’s quite light. Rear‑wheel drive offers dynamic handling and sporty feedback. Acceleration is relatively slow (0–100 km/h in 33 s). The top speed reaches 116 km/h. A compact car with a rear door that swings upward to provide access to the cargo area. Seating for 4 makes it ideal for daily use.

Pros and Cons:

Pros:

  • • Efficiency-focused engine (26 hp), ideal for city commuting.
  • • Steady and predictable acceleration (0-100 km/h in 33 sec).
  • • Rear-wheel drive layout for enhanced handling and balance.

Cons:

  • • Compact cargo space (110 L); may require careful packing.
  • • Previous generation model; may lack the latest driver-assist technologies.


Specifications:

Specifications are compared to those of the previous generation(126: 1977 - 1987).

General:
Brand:Fiat
Model:126
Generation:126
Modification (Engine):700 (26 Hp)
Start of production:1987
End of production:1996
Powertrain Architecture:Internal Combustion engine
Body type:Hatchback
Seats:4
Doors:3
Engine:
Power:26 Hp @ 4500 rpm. Same horsepower
Power per litre:36.9 Hp/l
Torque:49 Nm @ 2000 rpm.
Engine Model/Code:126 A2.048 More details about the engine 126 A2.048
Engine displacement:704
Number of cylinders:2
Engine configuration:Inline
Number of valves per cylinder:2
Fuel injection system:Carburettor
Engine aspiration:Naturally aspirated engine
Engine oil capacity:2.5 l
Engine layout:Rear, Transverse
Cylinder Bore:80 mm mm
Piston Stroke:70 mm mm
Compression ratio:8.6:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:5.8 l/100 km
Fuel consumption (economy) - extra urban:4.4 l/100 km
Acceleration 0 - 100 km/h:33 sec
Acceleration 0 - 62 mph:33 sec
Maximum speed:116 km/h
Weight-to-power ratio:24.8 kg/Hp, 40.3 Hp/tonne
Weight-to-torque ratio:13.2 kg/Nm, 76 Nm/tonne
Acceleration 0 - 60 mph:31.4 sec
Space:
Kerb Weight:645
Max. weight:990
Max load:345
Trunk (boot) space - maximum:555 l
Trunk (boot) space - minimum:110 l
Fuel tank capacity:21 l
Size:
Length:3105 mm mm
Width:1375 mm mm
Height:1345 mm mm
Wheelbase:1840 mm mm
Front track:1135 mm
Rear (Back) track:1170 mm
Minimum turning circle (turning diameter):9.2 m [above average]
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive wheelRear wheel drive
Number of gears4
Transmission typeManual
Front brakesDrum [bad for performance and cooling.]
Rear brakesDrum [bad for performance and cooling.]
Steering typeWorm-reduction unit
Tires size135/70 R13
Front suspensionIndependent type McPherson
Rear suspensionCoil spring

How many miles have you covered in your Fiat 126? Share your journey!