Chevrolet Malibu 1977 - 5.0 V8 (145 Hp) CAT specifications
Overview
What is the engine capacity of a Chevrolet Malibu 1977?
The engine capacity of the Chevrolet Malibu 1977 is 5001 cm.
Chevrolet Malibu 1977 How many horsepower?
The engine power of the Chevrolet Malibu 1977 is 145 Hp @ 3800 rpm..
General:
Brand
Chevrolet
Model
Malibu
Generation
Malibu IV Sport Coupe
Modification (Engine)
5.0 V8 (145 Hp) CAT
Start of production
1977
End of production
1978
Powertrain Architecture
Internal Combustion engine
Body type
Seats
6
Doors
2
Engine:
Power
145 hp @ 3800 rpm.
Power per litre
29 hp/l
Torque
332 nm @ 2400 rpm.
Engine displacement
5001 cm
Number of cylinders
8
Engine configuration
V-engine
Number of valves per cylinder
2
Fuel injection system
Carburettor
Engine aspiration
Naturally aspirated engine
Valvetrain
OHV
Engine oil capacity
4.2 l
Engine layout
Front, Longitudinal
Cylinder Bore
94.89 mm
Piston Stroke
88.4 mm
Compression ratio
8.4
Performance:
Fuel Type
Petrol (Gasoline)
Weight-to-power ratio
10.1 kg/Hp, 98.8 Hp/tonne
Weight-to-torque ratio
4.4 kg/Nm, 226.3 Nm/tonne
Electric system:
Size and space:
Kerb Weight
1467 kg
Trunk (boot) space - maximum
470 l
Fuel tank capacity
68 l
Dimensions:
Ramp-over (brakeover) angle
14°
Length
4895 mm
Width
1816 mm
Height
1354 mm
Wheelbase
2745 mm
Front track
1486 mm
Rear (Back) track
1467 mm
Front overhang
915 mm
Rear overhang
1235 mm
Ride height (ground clearance)
137 mm
Minimum turning circle (turning diameter)
12.2 m
Approach angle
20°
Departure angle
15°
Power transmission system, suspension and brake system:
Drivetrain Architecture
The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive wheel
Rear wheel drive
Number of gears and type of gearbox
4 gears, manual transmission
Front brakes
Ventilated discs
Rear brakes
Drum
Steering type
Steering rack and pinion
Tires size
195/75 R14; 205/75 R14
Wheel rims size
6.0J x 14
Front suspension
Independent, type McPherson with coil Spring and anti-roll bar
Rear suspension
dependent Spring suspension, Transverse stabilizer, Trailing arm
